AVE MVDR5000 Instrukcja Obsługi Pobierz pdf (Strona 9)

8

THE ABOVE FIGURE IS THE REAR

VIEW.

1. GND: Ground Contact.

2. ALARM OUT (OUTPUT): This is a

common alarm output trigger.

Connect this to external devices

such as buzzers or lights. Switches

Low (GND) (

5V

0V(Active)

)

3. DISK FULL (OUTPUT): This is a

disk full output trigger. Connect this

to external devices such as buzzers

or lights. Switches Low (GND)

(

5V

0V(Active)

)

4. ALARM RESET (INPUT): This pin

connects to an alarm-clear device

for clearing an alarm. Use a

Normally Open switch to GND.

(

5V

0V(Active)

)

5. RECORD IN (INPUT): This pin

connects to a record trigger device

for starting a record. Negative

Trigger. (

5V

0V(Active)

)

6. ALARM4 IN (INPUT): This is an

alarm input (for CH 4 ), which can

be programmed in the menu system

to Normally Open or Normally

Closed operation.

7. ALARM3 IN (INPUT): same as the

above, for CH 3

8. ALARM2 IN (INPUT): same as the

above, for CH 2

9. ALARM1 IN (INPUT): same as the

above, for CH 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 93 94

Komentarze do niniejszej Instrukcji

Brak uwag